CHEMIST 900 - Firmware & Software Updates

FIRMWARE

Information on how to update the firmware:

WARNING:
Since the firmware update could imply a different organization of the data stored in the instrument memory, maintaining the existing analysis data in the instrument is not guaranteed. Therefore it is always mandatory to make the transfer of the analysis from the instrument to the PC prior to the firmware update procedure.
Moreover, for the same reasons, it is absolutely mandatory that the management software tool installed on the PC is updated to a version compatible with the firmware version installed on the instrument.

 

1 - Plug in the AC power inlet to the electrical wall plug and to the IEC c14 plug of the analyzer.

2 - Plug in the analyzer to the PC via the USB cable.

3 - Hold down the power button (in red) on the analyzer for at least 10 seconds.

4 - Release the power button.

5 - The analyzer will reboot with a fixed red light on the status led.

6 - Press again the power button and the status led will be off.

7 - Release the power button and the status led will blink slowly.

8 - Copy the firmware file (.srec extension) to the directory of the analyzer.

9 - Wait till the end of the file copy operation.

10 - The file copy directory will be closed and the analyzer will restart.

11 - The analyzer is now updated, it can be powered off and it can be unplugged from the PC.

FW 1.11 (Int) - Download

FW 1.11 (Chinese) - Download

 


PC SOFTWARE

    

This is the software used to allow the instrument to be linked to a PC for the following operations:

  • Configuration of the instrument general parameters through the PC
  • Setting of the fuels parameters
  • Setting of the ticket data
  • Download of the analysis from the instrument into the PC
  • Saving of the analysis on a file in several formats

Download


CHEMIST SMART ANALYSIS APP

    

Chemist Smart Analysis allows you to interact with your Seitron combustion analyzer through the Bluetooth® LE (*) communication protocol.
Pair your analyzer with your smartphone / tablet via Bluetooth® and:

• perform Automatic or Manual analysis remotely
• view the analysis data in real time
• loads a previously saved analysis
• remotely save your analysis on the instrument
• create a report (pdf, csv, xml) and share it via Whatsapp, email

Note:
Chemist Smart Analysis is compatible with Chemist 500/600/900 analyzers and Chemist BE GREEN 500/600 family equipped with Bluetooth® LowEnergy interface and with FW 1.30 or higher upgrade.

(*) After updating the FW 1.30 or later, check on the analyzer (INFO SERVICE menu) the Bluetooth® value of the instrument.
     If the value is 3, your analyzer supports the use of Chemist Smart Analysis.
     If the detected value is 1 or 2 your analyzer does not have Bluetooth® LowEnergy. Contact Seitron here to request the replacement of the form.
 

  per iPhone per iPad

 

 

COMPATIBILITY CHART 

This chart explains the compatibility dependencies between the Firmware and Software instruments available for the flue gas analyzer Chemist 500.

Release Dates Firmware PC Software Android App iOS App Note
29/03/19 1.11 - 031948 1.0.2.8 - 030501 1.11 - 031433 1.3 - 031432 App Chemist Smart Analysis - supported from FW 1.30
29/01/19 1.09 - 031568 1.0.2.8 - 030501 1.13 - 027474   -
10/12/18 1.08 - 031270 1.0.2.8 - 030501 1.13 - 027474   -
28/09/18 1.07 - 030786 1.0.2.8 - 030501 1.13 - 027474   -
31/07/18 1.06 - 030540 1.0.2.8 - 030501 1.13 - 027474   -
17/05/18 1.05 - 029898 1.0.2.7 - 029307 1.13 - 027474   -
24/02/17 1.04 - 028147 1.0.2.7 - 029307 1.13 - 027474   -
10/10/16 1.03 - 027482 1.0.2.2 - 027469 1.13 - 027474   -
23/05/16 1.01 - 026329 1.0.2.0 - 026314 1.11 - 026870   -
10/11/15 1.00 - 025824 1.0.2.0 - 026314 -   -

230V or Battery powered Thermostat

Small Dimensions - Innovative Design
 

Large LCD
Power supply: 2 x 1,5V Type AAA batteries - TAD 02B   or   230V TAD 02M


3 regulation modes: Comfort, Economy, Off/Antifreeze

Remote sensor is optional



Learn more

 

News

Monday, 1 April, 2019 - 15:22
Tuesday, 18 September, 2018 - 08:55
Monday, 12 March, 2018 - 09:15

How to

Friday, 1 January, 2016 - 15:18
Monday, 23 November, 2015 - 09:52
Wednesday, 11 November, 2015 - 17:47

Company

SEITRON S.p.A. a socio unico

Via del Commercio 9/11

36065 - Mussolente (VI) ITALY

Tel. (+39) 0424.567842

Fax (+39) 0424.567849

info@seitron.it

            

ORARI APERTURA
dal Lunedì al Venerdì
8:30-13:00 / 14:00-17:30